Fixing up the house

As one of the most important systems in the home, the plumbing system must be properly maintained or problems can develop causing a homeowner a big headache. One of the most annoying plumbing problems is a toilet leak. A toilet leak is not only frustrating, but it can waste water and increase your water bill. Signs of a toilet leak can include: sounds coming from the toilet when it is not running, a homeowner has to keep the handle pressed so that the tank will empty, the water is running over the top of the overflow, water is running down the sides of toilet even when there is flushing, and the toilet continues to run even though the handle has not been pressed. These are visible indications that you may have a toilet leak; however, you can still have a toilet leak and not see or hear it. This type of leak is called a silent toilet leak. To properly diagnose a silent toilet leak there are a couple of tests that you can perform:

1. For most homeowners, performing a dye test for a silent toilet leak is a popular choice. Purchase dye from a plumbing supplier or water company. It is usually a red dye. Once you have acquired the dye, you can start to perform the leak test. First, remove the cover of the water tank. Remove any substance such as a drain cleaner that may be colouring the water. It is important that you have clear water to do the test. Put enough dye in the tank water so that there is a deep colour. Wait for about a half hour and then check to see if the water in the bowl has turned the colour of the dye. If the water has colour, then you definitely have a toilet leak.

2. Another silent toilet leak detecting test you can perform is to turn the water off at the water pipe that runs to the toilet before you go to bed. Check the water level in the morning. If you discover there is water loss in the tank, then you have a toilet leak.

Toilet leaks toilets are responsible for a large volume of water waste as a toilet leak can waste as much 500 gallons of water a day; which is clearly not good water conservation. Reasons for a toilet leak can include: worn out flapper or ball, damaged seat beneath the flapper, damaged gasket under the flush valve, hole or crack in the overflow tube, and a new seat or washer is needed for a ballcock.

Because a silent leak cannot be seen or heard, many homeowners do not realize they have a toilet leak until it is a serious problem and they have wasted a huge amount of water. Testing for silent leaks should be added to your plumbing system maintenance program. The benefit of testing for silent toilet leaks is you will save money on your water bills, practice responsible water conservation, and ensure that your toilet runs properly which is a definite necessity.

Looking for a local plumber to fix your plumbing problems? Then contact the plumbing experts at Mr.Rooter, offering plumbers Aurora and drains Richmond Hill services as well as plumbing services all across Canada.

Tweet This Post

The plumbing system consists of many essential components that must be handled with special care to avoid damage to a component and the entire plumbing system. There are a number of things that can cause a problem in the plumbing system which can negatively impact the system and the home. One such problem is a leak in the plumbing system.

A leak in the plumbing system is not only an annoying problem, but it can also become quite costly as it can drastically increase the water bill. As well, a small leak that is not repaired in a timely manner can eventually develop into an expensive repair job. To avoid water waste and an expensive repair bill, it is important to know how to detect leaks in the plumbing system.

Below is a helpful guide on how to detect a leak in plumbing systems:

1. If you have copper pipes, it is easy to check for leaks in these pipes. When examining your copper pipes, you will be able to identify a leak by a white circle that will have formed around the area of the pipe that is leaking.

2. You can check to see if there is a leak in the plumbing by checking your water meter. Turn off all of the taps and then check the water meter. If the water meter is still moving, this could suggest that there is a leak.

3. There are places in the home that should be checked for a leak. Places to check to see if there is a leak includes: water dripping around shower heads, toilet that is constantly running when not in use, water dripping from faucets, chronic sewer backups, foul odours, high water bills, cracked and moist foundation or concrete, moist spots under the carpets, moist or discoloured walls, floors, and ceilings, and mould and mildew growth. As well, check the water heating system, washing machine, pool, and basement, for visible signs of leaks. A water pump that is constantly running when not in use is another sign there may be a plumbing leak.

5. An effective way to check for leaks in your plumbing system is to perform a silent leak test in your toilet. You can use a red dye from a plumbing supplier or red food colouring. You just have to make sure the water in the toilet and tank is clear. Then, add the dye in the water tank and wait 30 minutes. If the water in the toilet bowl has turned red, then you have a toilet leak.

If you do not get a plumbing leak repaired, over time the leak will get worse and you could end up with a big messy repair job, especially if a sewer backs up and spills in the basement, which will end up being very expensive to fix. As part of a home maintenance program, the plumbing system should be regularly checked for leaks. If you have discovered a plumbing system leak, it is wise to contact a professional plumber who will be able repair the leak properly and end up saving you much more money than if you had just ignored the leak.

Looking for a local plumber Toronto to fix your plumbing problems? Then contact the plumbing experts at Mr.Rooter, offering plumbing Vancouver and plumber Mississauga services as well as plumbing services all across Canada. Visit mrrooter.ca to find a plumbing franchise in your city.

Tweet This Post